January Virtual Sketch Date

Here is my entry for the January Virtual Sketch date. I overworked this way too much to my liking but my husband could still recognize that it was an orange so that's good.

How to Make a Diorama Valentine's Card

These are really neat. I don't think the photo gives them justice. It's hard to show you the 3-D look of these.

They are mini diorama valentine scenes that fold up as a card. Once you get the hang of them they are very easy to make and your kids will love to try one. Please click on any picture to see larger.

Materials Required:

- 3 pieces of heavy paper (I used watercolor paper) measuring 10x6.5", 9x4.5" and

one little scrap piece

- a lighter piece of paper measuring 17.5 x 7" ( I used a paper bag )

- piece of colored cardstock

- glue stick

- scissors

- paint, pencil crayons, or markers

- glitter glue

click on to see larger

Take your 10 x 6.5 piece of paper. This is your background. Sketch out a quick landscape. I was trying to make something a bit whimsical.

Add color with whatever medium you wish. I'm using watercolor.

Now take your 9x4.5" piece of paper, this is your middle ground. Draw your focal image, you want to create a center image which then has long narrow arms to it on either side, add some color.

Cut the image out, keep those arms that go the full length of the paper.

Fold in half and place aside.

Take your background and fold it in half.

You now are going to glue your middle piece to your background. Only apply glue to the ends of your arms from your middle piece.

Your middle piece is 1 inch shorter than your background but you need to match up the ends. By putting the folds in you are able to get the ends to meet.

It will look like this from above. Please note that on this picture my ends shifted and they don't match up to my background. They should match up.

Take your scrap piece of paper and draw a few elements that will be in your foreground.

Add color.

Add some glitter if you want.

Cut out. Notice that my details are very narrow that is so they don't overwhelm my focal image in the middle section.

Take your long piece of paper and place some folds in the following places. Click on the picture to see larger.

Using the 6" section fold in 1/2.

Cut a heart shape out. This is the front of your diorama card.

Take that heart that you cut out of your paper and use it to trace onto your colored piece of cardstock.

Draw a heart about 1/2 inch larger around the traced image. Fold this paper in half.

Cut the inner heart shape out and then cut the larger shaped heart out. You will have a heart shaped frame.

Using the glue stick, glue this frame onto the heart cut out on your long piece of paper.

Turn this paper over. You can glue your foreground bits on at this time. You can also tape them if needed as you won't be able to see the tape in the final piece.

Glue your background/middle ground into place on the two 5" sections of your long piece of paper. Try to match up folds. Your long piece of paper will be 1 inch larger than your other pieces...try to center it the best you can.

You can also add embellishments to your foreground if needed. It sometimes easier to cut pieces out seperately and then glue on to the middle ground......you might also find you need to add some elements as you start to put the card together.

The card should fold up together. Your heart framed piece will fold up inside.

Take the little flap (1/2")and glue it down to the back of the card so it is all sealed.

When you open up the card you will have to just push the middle ground away from the background a bit for the fist few times. When you look down into the card it should look something like this.

These cards are very charming and you can come up with lots of different scenes.

Give it a try.




See you next time. I'm trying to do the Virtual sketch Date this month as I have been too busy the last 2 months so hopefully (fingers crossed) I can post my painting tomorrow by the deadline.

later

gail

How to Make a Chinese Dragon Puppet

So I thought the Grade 3's should make a Dragon Puppet for Chinese New Year. They are learning about traditions and celebrations so this seemed to fit.

I original wanted to post this last week but life got in the way with doctor appts. and dentist appts. so here it is now.

This is quite a photo intensive tutorial but don't let that scare you off the results are worth it.











Part 1: Paper mache

Materials Required:

- duct tape..you can use plain old masking or cellophane as well
- cardboard egg carton
- piece of flat cardboard...like from a box
- newspaper or newsprint
- empty frozen juice container
- white glue
- recycled yogurt container to hold glue mixture
- paper towels




Take your egg carton and cut the lid off from the egg compartments.







Cut the lid in half and then cut out 2 egg cups.





Staple the cut ends of the lid like this.




It should now look like this.



Take one page of newspaper or newsprint and roll and crumple into a shape like this. It sort of looks like a snakes head.




Using tape attach it to the top of the lid like this.




Add another piece of tape to the front to make it secure.



Attach your egg cups to either side of your head to look like this.

It doesn't have to be pretty just secure.


This is the upper head of the Dragon.



Take your flat cardboard and cut a lower jaw. Again it is shaped like a snake head. I used my upper head to measure how big to make this.



Take your frozen juice container and cut down to the bottom. Gently pull the bottom away from the sides.





Cut the cardboard side piece into two.




You should have three pieces now.




Take a quarter of a page of newsprint and make a roll long ways. Tape together.



Tape onto your bottom jaw to make a gum line. This gives you a space to attach some teeth later.



Mix up some white glue with water, about a 50/50 mix.

Tear up some paper towels into strips.




Begin paper maching. For the frozen juice container piece, coat fully with two layers of mache. Make a lump of mache in the middle of the inside. This will give you a place to attach the stick later.



On the outside you can make some bumps for your dragon if you want. This is his back.


Make sure you "tape down" your bumps with strips of paper mache that overlap onto the main section otherwise your bumps will just fall off.




Mache your lower jaw, giving it two coats to cover.




Mache your upper head. Try to cover all areas. I added some bumps for nostrils on mine.




On the underside make a lump of mache at the end close to where you stapled this piece. Again this will give you a place to attach your stick later.


Place all pieces on wax paper and leave in a warm place to dry. Turn them after a day so they will dry on all sides.


Part 2: Batiking the Dragon Skin

Materials Required:

- Elmer's washable blue gel glue (you can use the clear but it will ooze more so you will loose definition in your design)
- piece of fabric about 6 inches wide and 20 inches long
- wax paper






Draw on with glue a scale design for your dragon skin. Follow the directions from my blue glue batik tutorial if you are not familiar with this technique.


Let dry.


Part 3: Painting

Materials Required:

- acrylic paint for the fabric
- tempura or acrylic paint for paper mache
- paintbrush
- water




When your paper mache pieces have dried paint them completely with the colors and design of your choice.

I decidied to use traditional colors for mine.





Paint your fabric as well with watered down acrylic paint. Let dry, wash out the glue in warm water. Dry again.

Part 4: Assembly

Materials Required:

- glue gun or tacky glue....I used the glue gun because it was faster. Remember to only let an adult use a glue gun, kids ask your parents for help with this part.
- two sticks..I used chopsticks from the dollar store
- white foam for teeth
- red felt
- any trims you want for embellishing
- scissors





Take your white foam and cut out some teeth shapes.

Glue to the inside of the upper jaw.

It should look something like this.

Glue some teeth to the inside of the lower jaw.

Taking an awl or knitting needle punch a hole thru the end of the lower jaw like this.

Make a hole in the upper jaw like this. Don't go all the way thru just even to hold your stick in place.

Make a hole in the back piece thru the lump you made, again don't go all the way thru just enough to hold the stick in place.

Push one stick thru the lower jaw hole.

Put some glue in the hole in the upper jaw and place end of stick that has the lower jaw on it in place.

Hold until glue sets up.

It should look like this.

Cut a tongue piece from the red felt.

Attach the straight end to the upper jaw like this using glue.

Glue the rest of the tongue in place in the lower jaw. This part is a little tricky but you'll get it.

Lay your dragon pieces on your dragon skin and figure out where you want it to go.

Cut the fabric where it will attach to the back piece. I left the tail piece to be longer.

Glue the short piece into place on the inside of the back.

You can trim it to fit or gather it to fit whatever look you prefer.

Glue other end of the short piece of fabric between the upper and lower jaw pieces.

It should look something like this.

Cut your longer piece to taper at the end like a tail.

Attach to the inside of the back piece with glue.

Glue second stick into place into the hole in the middle of back on the inside.

Hold into place until glue sets up.

If you wish you can add some embellishments. I put a fringe on for a beard.

I also put some trim on the eyebrows of my dragon.

That's it! A working dragon puppet. Well worth the effort. I can't wait to see how the Grade 3's will turn out. They are currently at the painting stage.

see you next time

gail